Application module: Derived shape element ISO/TS 10303-1130:2018-11(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definition
   4.3 ARM entity definitions
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM type definition

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Contents

1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms
4 Information requirements
    4.1 Required AM ARMs
    4.2 ARM type definition
          4.2.1 dse_shape_model
    4.3 ARM entity definitions
          4.3.1 Apex
          4.3.2 Centre_axis
          4.3.3 Centre_of_symmetry
          4.3.4 Centre_plane
          4.3.5 Centre_point
          4.3.6 Derived_shape_element
          4.3.7 Extension
          4.3.8 Geometric_alignment
          4.3.9 Geometric_contact
          4.3.10 Geometric_intersection
          4.3.11 Median_curve
          4.3.12 Median_surface
          4.3.13 Offset_shape_element
          4.3.14 Parallel_offset
          4.3.15 Perpendicular_to
          4.3.16 Tangent
          4.3.17 Tangent_plane
5 Module interpreted model
    5.1 Mapping specification
          5.1.1 Apex
          5.1.2 Centre_axis
          5.1.3 Centre_of_symmetry
          5.1.4 Centre_plane
          5.1.5 Centre_point
          5.1.6 Characterizable_object
          5.1.7 Derived_shape_element
          5.1.8 Extension
          5.1.9 Geometric_alignment
          5.1.10 Geometric_contact
          5.1.11 Geometric_intersection
          5.1.12 Median_curve
          5.1.13 Median_surface
          5.1.14 Offset_shape_element
          5.1.15 Parallel_offset
          5.1.16 Perpendicular_to
          5.1.17 Product_occurrence_definition_relationship
          5.1.18 Product_view_definition
          5.1.19 Shape_element_description_association
          5.1.20 Shape_description_association
          5.1.21 Tangent
          5.1.22 Tangent_plane
          5.1.23 View_definition_relationship
    5.2 MIM EXPRESS short listing
      5.2.1 MIM type definition
          5.2.1.1 dse_shape_model
Annex A MIM short names
Annex B Information object registration
   B.1 Document identification
   B.2 Schema identification
Annex C ARM EXPRESS-G
Annex D MIM EXPRESS-G
Annex E Computer interpretable listings
Annex F Change history
      F.1 General
      F 2 Changes made in edition 2
            F 2.1 Summary of changes
            F 2.2 Changes made to the ARM
            F 2.3 Changes made to the mapping
            F 2.4 Changes made to the MIM
      F 3 Changes made in edition 3
            F 3.1 Summary of changes
            F 3.2 Changes made to the ARM
      F 4 Changes made in edition 4
            F 4.1 Summary of changes
            F 4.2 Changes made to the ARM
            F 4.3 Changes made to the MIM
      F 5 Changes made in edition 5
            F 5.1 Summary of changes
            F 5.2 Changes made to the ARM
Bibliography
Index

Figures

Figure C.1 — ARM schema level EXPRESS-G diagram 1 of 1
Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1
Figure D.1 — MIM schema level EXPRESS-G diagram 1 of 1
Figure D.2 — MIM entity level EXPRESS-G diagram 1 of 1

Tables

Table E.1 — ARM and MIM EXPRESS listings


© ISO 2018 — All rights reserved