Application module: Derived shape element | ISO/TS 10303-1130:2018-11(E) © ISO |
This clause specifies the EXPRESS schema derived from the mapping table. It uses elements from the common resources or from other application modules and defines the EXPRESS constructs that are specific to this part of ISO 10303.
This clause constitutes the Module Interpreted Module (MIM) of the application module.
This clause also specifies the modifications that apply to the constructs imported from the common resources.
The following restrictions apply to the use, in this schema, of constructs defined in common resources or in application modules:
Short names of entities defined in this schema are described in Annex A. Unambiguous identification of this schema is defined in Annex B.
EXPRESS specification:
*)
SCHEMA Derived_shape_element_mim;
USE FROM
Construction_geometry_mim;
--
ISO/TS 10303-1131
USE FROM
shape_aspect_definition_schema
--
ISO 10303-47
(apex,
centre_of_symmetry,
derived_shape_aspect,
extension,
geometric_alignment,
geometric_intersection,
parallel_offset,
perpendicular_to,
shape_aspect_deriving_relationship,
tangent);
USE FROM
Shape_property_assignment_mim;
--
ISO/TS 10303-1032
USE FROM
Value_with_unit_mim;
--
ISO/TS 10303-1054
(*
NOTE 1 The schemas referenced above are specified in the following part of ISO 10303:
Construction_geometry_mim ISO/TS 10303-1131 shape_aspect_definition_schema ISO 10303-47 Shape_property_assignment_mim ISO/TS 10303-1032 Value_with_unit_mim ISO/TS 10303-1054
NOTE 2 See Annex D, Figures D.1and D.2 for a graphical representation of this schema.
This subclause specifies the MIM type for this application module. The MIM type and definition is specified below.
The dse_shape_model type is an extension of the shape_model type. It adds the data type constructive_geometry_representation to the list of alternate data types.
EXPRESS specification:
*)
TYPE
dse_shape_model =
SELECT
BASED_ON
shape_model
WITH
(constructive_geometry_representation);
END_TYPE;
(*
*)
END_SCHEMA; -- Derived_shape_element_mim
(*
© ISO 2018 — All rights reserved