Application module: Fabrication technology ISO/TS 10303-1670:2018-11(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definitions
   4.3 ARM entity definitions
   4.4 ARM function definitions
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM type definitions
     5.2.2 MIM entity definitions
     5.2.3 MIM subtype constraint definitions

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesFirst pagePrevious pageNext pageLast page
Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 5 ./armexpg3.htm ./armexpg5.htm ./armexpg3.htm ./armexpg3.htm ./armexpg3.htm ./armexpg3.htm ./armexpg3.htm ./armexpg3.htm ./armexpg6.htm ../part_template/sys/4_info_reqs.htm#part_template_arm.template_definition ../product_view_definition/sys/4_info_reqs.htm#product_view_definition_arm.product_view_definition ../product_view_definition_relationship/sys/4_info_reqs.htm#product_view_definition_relationship_arm.view_definition_relationship ../characteristic/sys/4_info_reqs.htm#characteristic_arm.length_tolerance_characteristic ../characteristic/sys/4_info_reqs.htm#characteristic_arm.length_tolerance_characteristic ../product_view_definition/sys/4_info_reqs.htm#product_view_definition_arm.product_view_definition ../fabrication_technology/sys/4_info_reqs.htm#fabrication_technology_arm.local_linear_stack ../fabrication_technology/sys/4_info_reqs.htm#fabrication_technology_arm.design_stack_model ../fabrication_technology/sys/4_info_reqs.htm#fabrication_technology_arm.equivalent_sub_stack_definition ../fabrication_technology/sys/4_info_reqs.htm#fabrication_technology_arm.stratum_sub_stack ../fabrication_technology/sys/4_info_reqs.htm#fabrication_technology_arm.equivalent_stackup_model_definition ../fabrication_technology/sys/4_info_reqs.htm#fabrication_technology_arm.passage_technology_allocation_to_stack_model ../fabrication_technology/sys/4_info_reqs.htm#fabrication_technology_arm.stratum_stack_model


Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 5


© ISO 2018 — All rights reserved