Application module: Fabrication technology ISO/TS 10303-1670:2018-11(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definitions
   4.3 ARM entity definitions
   4.4 ARM function definitions
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM type definitions
     5.2.2 MIM entity definitions
     5.2.3 MIM subtype constraint definitions

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesFirst pagePrevious pageNext pageLast page
Figure C.3 — ARM entity level EXPRESS-G diagram 2 of 5 ../fabrication_technology/sys/4_info_reqs.htm#fabrication_technology_arm.ft_classification_item ../fabrication_technology/sys/4_info_reqs.htm#fabrication_technology_arm.ft_requirement_assignment_item ./armexpg2.htm ./armexpg2.htm ./armexpg5.htm ./armexpg2.htm ./armexpg4.htm ./armexpg4.htm ./armexpg4.htm ../requirement_assignment/sys/4_info_reqs.htm#requirement_assignment_arm.requirement_assignment_item ../characterizable_object/sys/4_info_reqs.htm#characterizable_object_arm.characterizable_object ../value_with_unit/sys/4_info_reqs.htm#value_with_unit_arm.length_measure ../value_with_unit_extension/sys/4_info_reqs.htm#value_with_unit_extension_arm.length_data_element ../classification_assignment/sys/4_info_reqs.htm#classification_assignment_arm.classification_item ../value_with_unit_extension/sys/4_info_reqs.htm#value_with_unit_extension_arm.angle_data_element ../fabrication_technology/sys/4_info_reqs.htm#fabrication_technology_arm.up_or_down ../fabrication_technology/sys/4_info_reqs.htm#fabrication_technology_arm.inverse_copy_stratum_technology_occurrence_relationship ../fabrication_technology/sys/4_info_reqs.htm#fabrication_technology_arm.copy_stratum_technology_occurrence_relationship ../fabrication_technology/sys/4_info_reqs.htm#fabrication_technology_arm.allocated_passage_minimum_annular_ring ../fabrication_technology/sys/4_info_reqs.htm#fabrication_technology_arm.stratum_technology_occurrence_link ../fabrication_technology/sys/4_info_reqs.htm#fabrication_technology_arm.stratum_technology_occurrence ../fabrication_technology/sys/4_info_reqs.htm#fabrication_technology_arm.stratum_technology_occurrence_swap_relationship ../fabrication_technology/sys/4_info_reqs.htm#fabrication_technology_arm.derived_stratum_technology_occurrence_relationship ../fabrication_technology/sys/4_info_reqs.htm#fabrication_technology_arm.stratum_technology_occurrence_feature_constraint ../fabrication_technology/sys/4_info_reqs.htm#fabrication_technology_arm.stratum_technology_occurrence_relationship


Figure C.3 — ARM entity level EXPRESS-G diagram 2 of 5


© ISO 2018 — All rights reserved