Application module: Kinematic structure ISO/TS 10303-1797:2018-11(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definitions
   4.3 ARM entity definitions
   4.4 ARM subtype constraint definitions
   4.5 ARM function definitions
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesFirst pagePrevious pageNext pageLast page
Figure C.6 — ARM entity level EXPRESS-G diagram 5 of 8 ./armexpg4.htm ./armexpg4.htm ../value_with_unit/sys/4_info_reqs.htm#value_with_unit_arm.plane_angle_measure ../value_with_unit/sys/4_info_reqs.htm#value_with_unit_arm.length_measure ../value_with_unit/sys/4_info_reqs.htm#value_with_unit_arm.length_measure ../kinematic_structure/sys/4_info_reqs.htm#kinematic_structure_arm.prismatic_pair_with_range ../kinematic_structure/sys/4_info_reqs.htm#kinematic_structure_arm.planar_pair_with_range ../kinematic_structure/sys/4_info_reqs.htm#kinematic_structure_arm.planar_pair ../kinematic_structure/sys/4_info_reqs.htm#kinematic_structure_arm.prismatic_pair


Figure C.6 — ARM entity level EXPRESS-G diagram 5 of 8


© ISO 2018 — All rights reserved