Application module: Kinematic structure ISO/TS 10303-1797:2018-11(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definitions
   4.3 ARM entity definitions
   4.4 ARM subtype constraint definitions
   4.5 ARM function definitions
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

5.2 MIM EXPRESS short listing

This clause specifies the EXPRESS schema derived from the mapping table. It uses elements from the common resources or from other application modules and defines the EXPRESS constructs that are specific to this part of ISO 10303.

This clause constitutes the Module Interpreted Module (MIM) of the application module.

This clause also specifies the modifications that apply to the constructs imported from the common resources.

The following restrictions apply to the use, in this schema, of constructs defined in common resources or in application modules:

Short names of entities defined in this schema are described in Annex A. Unambiguous identification of this schema is defined in Annex B.

EXPRESS specification:

*)
SCHEMA Kinematic_structure_mim;

USE FROM Kinematic_topology_mim;    --  ISO/TS 10303-1799

USE FROM Basic_curve_mim;    --  ISO/TS 10303-1651

USE FROM Assembly_structure_mim;    --  ISO/TS 10303-1026

USE FROM Geometric_model_relationship_mim;    --  ISO/TS 10303-1403

USE FROM Composite_surface_mim;    --  ISO/TS 10303-1525

USE FROM Shape_property_assignment_mim;    --  ISO/TS 10303-1032

USE FROM kinematic_structure_schema;    --  ISO 10303-105

USE FROM kinematic_property_schema    --  ISO 10303-105
  (product_definition_relationship_kinematics,
   kinematic_property_mechanism_representation,
   context_dependent_kinematic_link_representation);
(*

NOTE 1   The schemas referenced above are specified in the following part of ISO 10303:

Kinematic_topology_mim ISO/TS 10303-1799
Basic_curve_mim ISO/TS 10303-1651
Assembly_structure_mim ISO/TS 10303-1026
Geometric_model_relationship_mim ISO/TS 10303-1403
Composite_surface_mim ISO/TS 10303-1525
Shape_property_assignment_mim ISO/TS 10303-1032
kinematic_structure_schema ISO 10303-105
kinematic_property_schema ISO 10303-105

NOTE 2   See Annex D, Figure D.1 for a graphical representation of this schema.



*)
END_SCHEMA;  -- Kinematic_structure_mim
(*


© ISO 2018 — All rights reserved