ISO/TS 10303-1741:2018-11 Sequential laminate assembly design


Application module: Sequential laminate assembly design	ISO/TS 10303-1741:2018-11(E) © ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
3.1 Terms and definitions
3.2 Abbreviated terms

4 Information requirements
4.1 Required AM ARM
4.2 ARM type definitions
4.3 ARM entity definitions
5 Module interpreted model
5.1 Mapping specification
5.2 MIM EXPRESS short listing
5.2.1 MIM type definitions
5.2.2 MIM entity definitions

A MIM short names
B Information object registration
C ARM EXPRESS-G
D MIM EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

5.1 Mapping specification

In the following, "Application element" designates any entity data type defined in Clause 4, any of its explicit attributes and any subtype constraint. "MIM element" designates any entity data type defined in Clause 5.2 or imported with a USE FROM statement, from another EXPRESS schema, any of its attributes and any subtype constraint defined in Clause 5.2 or imported with a USE FROM statement.

This clause contains the mapping specification that defines how each application element of this part of ISO 10303 (see Clause 4) maps to one or more MIM elements (see Clause 5.2).

The mapping for each application element is specified in a separate subclause below. The mapping specification of an attribute of an ARM entity is a subclause of the clause that contains the mapping specification of this entity. Each mapping specification subclause contains up to five elements.

Title: The clause title contains:

the name of the considered ARM entity or subtype constraint, or
the name of the considered ARM entity atribute when this attribute refers to a type that is not an entity data type or a SELECT type that contains or may contain entity data types, or
a composite expression, <attribute name> to <referred type>, when this attribute refers to a type that is not an entity data type or a SELECT type that contains or may contain entity data types.

MIM element: This section contains, depending on the considered application element:

the name of one or more MIM entity data types;
the name of a MIM entity attribute, presented with the syntax <entity name>.<attribute name>, when the considered ARM attribute refers to a type that is not an entity data type or a SELECT type that contains or may contain entity data types;
the term PATH, when the considered ARM entity attribute refers to an entity data type or to a SELECT type that contains or may contain entity data types;
the term IDENTICAL MAPPING, when both application objects involved in an application assertion map to the same instance of a MIM entity data type;
the term NO MAPPING EXTENSION PROVIDED, when the extension to an extensible SELECT TYPE has no impact;
the syntax /SUPERTYPE(<supertype name>)/, when the considered ARM entity is mapped as its supertype;
one or more constructs /SUBTYPE(<subtype name>)/, when the mapping of the considered ARM entity is the union of the mapping of its subtypes.

When the mapping of an application element involves more than one MIM element, each of these MIM elements is presented on a separate line in the mapping specification, enclosed between parentheses or brackets.

Source: This section contains:

the ISO standard number and part number in which the MIM element is defined, for those MIM elements that are defined in a common resource document;
the ISO standard number and part number of this part of ISO 10303, for those MIM elements that are defined in the MIM schema of this part.

This section is omitted when the keywords PATH or IDENTICAL MAPPING or NO MAPPING EXTENSION PROVIDED are used in the MIM element section.

Rules: This section contains the name of one or more global rules that apply to the population of the MIM entity data types listed in the MIM element section or in the reference path. When no rule applies, this section is omitted.

A reference to a global rule may be followed by a reference to the subclause in which the rule is defined.

Constraint: This section contains the name of one or more subtype constraints that apply to the population of the MIM entity data types listed in the MIM element section or in the reference path. When no subtype constraint applies, this section is omitted.

A reference to a subtype constraint may be followed by a reference to the subclause in which the subtype constraint is defined.

Reference path: This section contains:

the reference path to its supertypes in the common resources, for each MIM element created within this part of ISO 10303;
the specification of the relationships between MIM elements, when the mapping of an application element requires to relate instances of several MIM entity data types. In such a case, each line in the reference path documents the role of a MIM element relative to the referring MIM element or to the next referred MIM element.

For the expression of reference paths and of the constraints between MIM elements, the following notational conventions apply:

[]	enclosed section constrains multiple MIM elements or sections of the reference path are required to satisfy an information requirement;
()	enclosed section constrains multiple MIM elements or sections of the reference path are identified as alternatives within the mapping to satisfy an information requirement;
{}	enclosed section constrains the reference path to satisfy an information requirement;
<>	enclosed section constrains at one or more required reference path;
\|\|	enclosed section constrains the supertype entity;
->	the attribute, whose name precedes the -> symbol, references the entity or select type whose name follows the -> symbol;
<-	the entity or select type, whose name precedes the <- symbol, is referenced by the entity attribute whose name follows the <- symbol;
[i]	the attribute, whose name precedes the [i] symbol, is an aggregate; any element of that aggregate is referred to;
[n]	the attribute, whose name precedes the [n] symbol, is an ordered aggregate; member n of that aggregate is referred to;
=>	the entity, whose name precedes the => symbol, is a supertype of the entity whose name follows the => symbol;
<=	the entity, whose name precedes the <= symbol, is a subtype of the entity whose name follows the <= symbol;
=	the string, select, or enumeration type is constrained to a choice or value;
\	the reference path expression continues on the next line;
*	one or more instances of the relationship entity data type may be assembled in a relationship tree structure. The path between the relationship entity and the related entities, is enclosed with braces;
--	the text following is a comment or introduces a clause reference;
*>	the select or enumeration type, whose name precedes the > symbol, is extended into the select or enumeration type whose name follows the > symbol;
<*	the select or enumeration type, whose name precedes the <* symbol, is an extension of the select or enumeration type whose name follows the <* symbol;
!{}	section enclosed by {} indicates a negative constraint placed on the mapping.

The definition and use of mapping templates is not supported in the present version of the application modules. However, use of predefined templates /SUBTYPE/ and /SUPERTYPE/ is supported.

5.1.1 Adjacent_stratum_surface_embedded_physical_component_surface_definition

This application object, Adjacent_stratum_surface_embedded_physical_component_surface_definition, is defined in the module layered_interconnect_module_design. This mapping section extends the mapping of Adjacent_stratum_surface_embedded_physical_component_surface_definition, to include assertions defined in this module.

This section specifies the mapping of the entity Adjacent_stratum_surface_embedded_physical_component_surface_definition for the case where it maps onto the resource entity (/SUBTYPE(Adjacent_stratum_surface_embedded_sequential_laminate_surface_definition)/) . Depending on the extensions of the Select type component_feature_or_stratum_surface, this mapping may be superseded in the application modules that define these extensions.

MIM element:

(/SUBTYPE(Adjacent_stratum_surface_embedded_sequential_laminate_surface_definition)/)

5.1.2 Adjacent_stratum_surface_embedded_sequential_laminate_surface_definition

MIM element:	shape_aspect_relationship
Source:	ISO 10303-41
Reference path:	{shape_aspect_relationship shape_aspect_relationship.name = 'adjacent stratum surface embedded sequential laminate surface'}

5.1.3 Derived_laminate_assignment

MIM element:	derived_laminate_assignment
Source:	ISO 10303-1741
Reference path:	derived_laminate_assignment <= property_definition_relationship

5.1.3.1 Derived_laminate_assignment to Interconnect_module_stratum_assembly_relationship (as oem_requirement)

MIM element:	PATH
Reference path:	derived_laminate_assignment <= property_definition_relationship property_definition_relationship.relating_property_definition -> property_definition property_definition.definition -> characterized_definition = characterized_product_definition characterized_product_definition = product_definition_relationship product_definition_relationship => product_definition_usage => assembly_component_usage

5.1.3.2 Derived_laminate_assignment to Sequential_laminate_assembly_relationship (as solution_definition)

MIM element:	PATH
Reference path:	derived_laminate_assignment <= property_definition_relationship property_definition_relationship.related_property_definition -> property_definition property_definition.definition -> characterized_definition = characterized_product_definition characterized_product_definition = product_definition_relationship product_definition_relationship => product_definition_usage => assembly_component_usage

5.1.3.3 Derived_laminate_assignment to Stratum_technology_occurrence (as oem_requirement)

MIM element:	PATH
Reference path:	derived_laminate_assignment <= property_definition_relationship property_definition_relationship.relating_property_definition -> property_definition => stratum_technology_occurrence

5.1.4 Group

This application object, Group, is defined in the module group. This mapping section extends the mapping of Group, to include assertions defined in this module.

5.1.4.1 Group to Group_relationship (as elements)

Reference path:

group <- group_assignment.assigned_group
group_assignment => applied_group_assignment
applied_group_assignment.items[i] -> groupable_item
group <- group_assignment.assigned_group
group_assignment => applied_group_assignment
applied_group_assignment.items[i] -> groupable_item
groupable_item *> slad_groupable_item
slad_groupable_item = group_relationship

5.1.4.2 Group to Interconnect_module_stratum_assembly_relationship (as elements)

Reference path:

5.1.5 Interconnect_module_component_stratum_based_terminal

MIM element:	physical_component_terminal
Source:	ISO 10303-1721
Reference path:	physical_component_terminal <= component_terminal <= component_feature <= shape_aspect {shape_aspect shape_aspect.description = 'interconnect module component stratum based terminal'}

5.1.5.1 Interconnect_module_component_stratum_based_terminal to Interconnect_module_stratum_based_terminal (as definition)

MIM element:

PATH

Reference path:

physical_component_terminal <=
component_terminal <=
component_feature <=
shape_aspect
shape_aspect <-
shape_aspect_relationship.related_shape_aspect
shape_aspect_relationship
{shape_aspect_relationship.description = 'interconnect module component stratum based terminal definition'}
shape_aspect_relationship.relating_shape_aspect ->
shape_aspect
shape_aspect =>
interconnect_module_terminal =>
interconnect_module_stratum_based_terminal

5.1.6 Interconnect_module_component_terminal

This application object, Interconnect_module_component_terminal, is defined in the module assembly_module_with_interconnect_component. This mapping section extends the mapping of Interconnect_module_component_terminal, to include assertions defined in this module.

MIM element:

(/SUBTYPE(Interconnect_module_component_stratum_based_terminal)/)

5.1.7 Interconnect_module_product_assembly_view_fabrication_joint

MIM element:	sequential_laminate_passage_based_fabrication_joint
Source:	ISO 10303-1741
Reference path:	sequential_laminate_passage_based_fabrication_joint <= shape_aspect {shape_aspect.description = 'interconnect module product assembly view fabrication joint'}

5.1.7.1 Interconnect_module_product_assembly_view_fabrication_joint to Interconnect_module_component_stratum_based_terminal (as joined_terminal)

MIM element:	PATH
Reference path:	sequential_laminate_passage_based_fabrication_joint <= shape_aspect <- shape_aspect_relationship.relating_shape_aspect shape_aspect_relationship shape_aspect_relationship.related_shape_aspect -> shape_aspect {shape_aspect.description = 'interconnect module component stratum based terminal'} shape_aspect => component_feature => component_terminal => physical_component_terminal

5.1.8 Interconnect_module_stratum_based_terminal

MIM element:	interconnect_module_stratum_based_terminal
Source:	ISO 10303-1741
Reference path:	interconnect_module_stratum_based_terminal <= interconnect_module_terminal <= shape_aspect {shape_aspect shape_aspect.of_shape -> product_definition_shape <= property_definition {property_definition.name = 'interconnect module'}}

5.1.9 Material_identification

This application object, Material_identification, is defined in the module generic_material_aspects. This mapping section extends the mapping of Material_identification, to include assertions defined in this module.

5.1.9.1 Material_identification to Definition_based_product_occurrence (as items)

MIM element:	PATH
Reference path:	material_designation.definitions[i] -> characterized_definition material_designation.definitions[i] -> characterized_definition = characterized_product_definition = (/MAPPING_OF(Definition_based_product_occurrence)/)

5.1.10 Requirement_assignment

This application object, Requirement_assignment, is defined in the module requirement_assignment. This mapping section extends the mapping of Requirement_assignment, to include assertions defined in this module.

5.1.10.1 Requirement_assignment to Derived_laminate_assignment (as assigned_to)

Reference path:

requirement_assignment <-
requirement_assigned_object.assigned_group
requirement_assigned_object
requirement_assigned_object.items ->
requirement_assigned_item
requirement_assigned_item *> slad_requirement_assigned_item
slad_requirement_assigned_item =
derived_laminate_assignment

5.1.10.2 Requirement_assignment to Sequential_laminate_assembly_relationship (as assigned_to)

Reference path:

5.1.11 Sequential_laminate_assembly_relationship

MIM element:	assembly_component_usage
Source:	ISO 10303-44
Reference path:	assembly_component_usage <= product_definition_usage <= product_definition_relationship {product_definition_relationship.name = 'sequential laminate assembly relationship'}

5.1.11.1 Sequential_laminate_assembly_relationship to Sequential_laminate_stackup_component (as component)

MIM element:	PATH
Reference path:	assembly_component_usage <= product_definition_usage <= product_definition_relationship product_definition_relationship.related_product_definition -> product_definition => component_definition => assembly_component => physical_component => sequential_laminate_stackup_component

5.1.11.2 Sequential_laminate_assembly_relationship to Sequential_laminate_stackup_definition (as assembly)

MIM element:	PATH
Reference path:	assembly_component_usage <= product_definition_usage <= product_definition_relationship product_definition_relationship.relating_product_definition -> product_definition => sequential_laminate_stackup_definition

5.1.12 Sequential_laminate_stackup_component

MIM element:	sequential_laminate_stackup_component
Source:	ISO 10303-1741
Reference path:	sequential_laminate_stackup_component <= physical_component <= assembly_component <= component_definition <= product_definition

5.1.13 Sequential_laminate_stackup_definition

MIM element:	sequential_laminate_stackup_definition
Source:	ISO 10303-1741
Reference path:	sequential_laminate_stackup_definition <= product_definition

5.1.13.1 Sequential_laminate_stackup_definition to Design_stack_model (as associated_stratum_stack)

MIM element:

PATH

Reference path:

sequential_laminate_stackup_definition <=
product_definition
characterized_product_definition = product_definition
characterized_definition = characterized_product_definition
characterized_definition <-
property_definition.definition
property_definition
property_definition <-
property_definition_relationship.relating_property_definition
property_definition_relationship
{property_definition_relationship
property_definition_relationship.name = 'associated stratum stack'}
property_definition_relationship.related_property_definition ->
property_definition =>
product_definition_shape =>
part_template_definition =>
stratum_stack_model =>
design_stack_model

5.1.13.2 Sequential_laminate_stackup_definition to Stratum_sub_stack (as associated_stratum_stack)

MIM element:

PATH

Reference path:

5.1.14 Stackup_requirement_to_design_relationship

MIM element:	product_definition_relationship
Source:	ISO 10303-44
Reference path:	product_definition_relationship {product_definition_relationship.name = 'derived stratum relationship'}

5.1.14.1 Stackup_requirement_to_design_relationship to Layered_interconnect_module_design_view (as relating_view)

MIM element:	PATH
Reference path:	product_definition_relationship product_definition_relationship.relating_product_definition -> product_definition => physical_unit => interconnect_module_design_view => layered_interconnect_module_design_view

5.1.14.2 Stackup_requirement_to_design_relationship to Sequential_laminate_stackup_definition (as related_view)

MIM element:	PATH
Reference path:	product_definition_relationship product_definition_relationship.related_product_definition -> product_definition => sequential_laminate_stackup_definition